PLPLPL

Point-elastic sports floor system

The point-elastic sports floor system is a set of polyurethane resin based materials for making elastic, multilayer sports floor systems. It is designed for professional indoor use in such objects as sports halls, gymnasiums, recreational rooms, body building gyms, health care facilities (e.g. physical rehabilitation rooms), etc. It is applied directly to concrete substrates.

The advantages of the floor are: high elasticity, good efficient damping of impact energy, high coefficient of friction, aesthetic appearance due to many available topcoat colour compositions, seamless and easy to clean.

The floor system consists of rubber granulate mat. Thickness of rubber granulate mat is 7 mm. This mat has very specific volumetric weight (using another type of mat of comparable thickness can cause failure to comply with the requirements of the standard). Rubber granulate mat is glued by NOVOFLOOR P21 adhesive to the substrate (which has been primed by NOVOFLOOR P10 sealer). In next step mat is sealed by NOVOFLOOR P32. After preparing the surface in the described manner, a layer of the NOVOFLOOR P42 elastic self-levelling polyurethane coating is applied. Once NOVOFLOOR P42 has cured, the pitch lines can be set. The surface of NOVOFLOOR P42 shall be painted with a NOVOFLOOR P66W water-borne coloured topcoat, which gives the abrasion and matt values required by EU standards. The next stage involves painting the pitch lines with NOVOFLOOR P68.

The thickness of the point-elastic sports floor is ca 9 mm. In case of fitness, where an investor does not require compliance with the European Standard, 4 mm rubber granulate mat could be used and the total thickness of system is ca 6 mm (special, additional mats have to use in case of bodybuilding gym areas.


Property Value Test method
Shock absorption 25% PN-EN 14808
Resistance to rolling loads >1500N PN-EN 1569
Impact strength >800 PN-EN 1517
Resistance to denting 0.16mm PN-EN 1516
Resistance to abrasion 337mg PN-EN ISO 5470-1
Vertical deformation 1.0mm PN-EN 14809
Ball rebound height 94% PN-EN 12235
Coefficient of gloss 15% PN-EN ISO 2813
Slip, PVT grades, dry 82 PN-EN 13036-4
Reaction to fire Bfl-s1 EN 13501-1
 
 
   
NOVOL Sp. z o.o.   ul. Żabikowska 7/9;   PL62-052 Komorniki;   tel. +48 61 810 98 00   fax.+48 61 810 98 09  
 
   
X
Nowe zasady dotyczące cookies. Wykorzystujemy pliki cookies, aby nasz serwis lepiej spełniał Państwa oczekiwania. Można zablokować zapisywanie cookies zmieniając ustawienia przeglądarki. Szczegółowe informacje w polityce naszej firmy dotyczącej cookies.
Мы используем файлы cookie для статистических целей (Google Analitics). Вы можете заблокировать их сохранение, изменяя установки браузера.
We use cookies for statistical purposes (Google Analitics). You can block our cookies by changing your browser settings.